Filter filter insert for pool pump iii l 290589

Filter Cartridge for JILONG Pool Pumps Type 'III' L Original filter cartridge for JILONG pool pumps type 'III' L which, together with the filter pump, will ensure the cleanliness of the water in your pool, made of dacron material, easy to clean and replace.

Application: JILLONG 29P417 pumps with a capacity of 3785L / H BESTWAY type 'III' 58012 for pumps 58147 / 58116 / 58121 / 58122 / 58123 and INTEX 29000 type A for pumps 28603 / 280604 / 28637 / 28638 / 28635 / 28636 / 28671 / 28672

Technical data:

Ensures pool water clarity

Easy filter replacement and cleaning

High filtration efficiency

High quality workmanship

Type: dacron

Weight: 0.15 kg

Height: 200 mm

Outer diameter: 105 mm

Hole diameter: 55 mm

Product code: 290589

Application: pumps with a capacity of: 2006 - 5678 l / h

Manufacturer: JILONG

If you want the water in your pool to remain perfectly clean, remember to regularly replace or systematically clean the filter, thanks to which you will enjoy comfortable and safe bathing conditions. The best ally in the fight against dirty water is its effective filtration. Thanks to Avenli Jilong type III L filters, you can be sure that your pump is working properly and effectively catching even the smallest dirt.

Paper filter inserts should be replaced once every 2-4 weeks. The Avenli Jilong type III L dacron filter is able to effectively filter water for a period of about several months (the time of use depends on the degree of water contamination, the frequency of use of the pool and the number of people bathing in it). You can significantly extend the life of the dacron filter by washing it at least once a week with water from a garden hose under high pressure. A properly washed filter should be white. This simple action can take care of the quality of the water in the pool without depleting your home piggy bank. A regularly cleaned Avenli Jilong type III L filter will allow you to enjoy clean water in the pool for a much longer period of time, even throughout the entire season. If dirt is visible, then the filter should be replaced with a new one. The insert is made of the highest quality dacron material, which ensures not only a long life but also high filtration efficiency. It stops both larger and smaller impurities, reducing the risk of bacteria developing in the pool water. It is easy to clean and replace. The original Avenli Jilong type III L filters are now even thicker and denser, all to ensure even better filtration and water permeability.

How to replace the filter:

step 1: disconnect the filter pump from the power source

step 2: unscrew the top cover of the pump

step 3: remove the gasket and filter cover

step 4: replace the cartridge

step 5: replace the gasket and tighten the top cover

A clean, efficient filter is an essential element for the proper functioning of the filter pump and maintaining clean, clear water in the swimming pool. THE WATER IN THE POOL SHOULD BE A SOURCE OF GOOD WELL-BEING AND HEALTH, AND THEREFORE IT MUST BE SAFE FOR USERS